Theroadislong (talk | contribs) Undid revision 470956050 by 109.70.140.167 (talk)both terms are in common use please stop edit warring |
109.70.140.167 (talk) Undid revision 470956514 by Theroadislong (talk) |
||
Line 18: | Line 18: | ||
==Firing== |
==Firing== |
||
Earthenware is commonly [[bisque (pottery)|biscuit]] (or "bisque") fired to temperatures between 1000 and 1150 °C (1800 and 2100 °F), and glost-fired |
Earthenware is commonly [[bisque (pottery)|biscuit]] (or "bisque") fired to temperatures between 1000 and 1150 °C (1800 and 2100 °F), and glost-fired from {{convert|950|to|1050|C|F}}. However examples of the reverse — low biscuit and high glost firing — can also be found: this can be popular with some studio potters where biscuit temperatures may be {{convert|900|to|1050|C|F}} with glost temperatures in the range of {{convert|1040|to|1150|C|F}}. The exact temperature will be influenced by the raw materials used and the desired characteristics of the finished ware. The higher firing temperatures are likely to cause earthenware to [[List of pottery terms#B|bloat]]. After firing, the body is porous and opaque with colours ranging from white to red depending on the raw materials used. |
||
==See also== |
==See also== |
Revision as of 13:19, 12 January 2012
Earthenware is a common ceramic material, which is used extensively for pottery tableware and decorative objects.
Types of earthenware
Although body formulations vary between countries and even between individual makers, a generic composition is 25% ball clay, 28% kaolin, 32% quartz, and 15% feldspar. Earthenware is one of the oldest materials used in pottery. While red earthenware made from red clays is very familiar and recognizable, white and buff colored earthenware clays are also commercially available and commonly used.
Earthenware may sometimes be as thin as bone china and other porcelains, though it is not translucent and is more easily chipped. It is also less strong, less tough, and more porous than stoneware, but is less expensive and easier to work. Due to its higher porosity, earthenware must usually be glazed in order to be watertight.
There are several types of earthenware, including
Firing
Earthenware is commonly biscuit (or "bisque") fired to temperatures between 1000 and 1150 °C (1800 and 2100 °F), and glost-fired from 950 to 1,050 °C (1,740 to 1,920 °F). However examples of the reverse — low biscuit and high glost firing — can also be found: this can be popular with some studio potters where biscuit temperatures may be 900 to 1,050 °C (1,650 to 1,920 °F) with glost temperatures in the range of 1,040 to 1,150 °C (1,900 to 2,100 °F). The exact temperature will be influenced by the raw materials used and the desired characteristics of the finished ware. The higher firing temperatures are likely to cause earthenware to bloat. After firing, the body is porous and opaque with colours ranging from white to red depending on the raw materials used.
See also
References
- Rado, P. An Introduction to the Technology Of Pottery. 2nd edition. Pergamon Press, 1988.
- Ryan W. and Radford, C. Whitewares: Production, Testing And Quality Control. Pergamon Press, 1987.
- Hamer, Frank and Janet. The Potter's Dictionary of Materials and Techniques. A & C Black Publishers Limited, London, England, Third Edition, 1991. ISBN 0-8122-3112-0.