Typo fixing, overlink using AWB |
Shootbamboo (talk | contribs) rm compounds that are not fluorocarbons, and rm content that is more thoroughly covered at organofluorine chemistry |
||
Line 89: | Line 89: | ||
==Environmental and Health Concerns== |
==Environmental and Health Concerns== |
||
Despite the presence of some natural fluorocarbons and fluorocarbon-derivatives, such as tetrafluoromethane and CFCs, which have been reported in [[igneous]] and [[metamorphic rock]],<ref name="Murphy2003">Murphy CD, Schaffrath C, O'Hagan D.: [http://www.ncbi.nlm.nih.gov/pubmed/12738270 "Fluorinated natural products: the biosynthesis of fluoroacetate and 4-fluorothreonine in ''Streptomyces cattleya''"] Chemosphere. 2003 Jul;52(2):455-61.</ref> man-made fluorocarbon based compounds are implicated in a variety of environmental and health related issues. For example, [[Haloalkane#Environmental_issues|CFCs]] deplete the [[ozone layer]] while fluoroalkanes, commonly referred to as [[perfluorocarbons]], are potent [[greenhouse gases]]. Also, the fluorosurfactants PFOS and PFOA, and other related chemicals, are persistent global contaminants. PFOS is a proposed [[persistent organic pollutant]] and may be currently harming the health of wildlife. |
Despite the presence of some natural fluorocarbons and fluorocarbon-derivatives, such as tetrafluoromethane and CFCs, which have been reported in [[igneous]] and [[metamorphic rock]],<ref name="Murphy2003">Murphy CD, Schaffrath C, O'Hagan D.: [http://www.ncbi.nlm.nih.gov/pubmed/12738270 "Fluorinated natural products: the biosynthesis of fluoroacetate and 4-fluorothreonine in ''Streptomyces cattleya''"] Chemosphere. 2003 Jul;52(2):455-61.</ref> man-made fluorocarbon based compounds are implicated in a variety of environmental and health related issues. For example, [[Haloalkane#Environmental_issues|CFCs]] deplete the [[ozone layer]] while fluoroalkanes, commonly referred to as [[perfluorocarbons]], are potent [[greenhouse gases]]. Also, the fluorosurfactants PFOS and PFOA, and other related chemicals, are persistent global contaminants. PFOS is a proposed [[persistent organic pollutant]] and may be currently harming the health of wildlife. |
||
==Chemical properties== |
|||
As a result of these unique features of the [[carbon-fluorine bond]], an overarching theme in [[organofluorine chemistry]] is the contrasting set of physical and chemical properties in comparison to the corresponding hydrocarbons. Case studies follow. |
|||
===Pentakis(trifluoromethyl)cyclopentadiene=== <!--probably should be removed, these are not important compounds--> |
|||
Pentakis(trifluoromethyl)cyclopentadiene (C<sub>5</sub>(CF<sub>3</sub>)<sub>5</sub>H) is a strong [[acid]], with a pK<sub>a</sub> = −2. Its high acidity and robustness is indicated by the fact that this compound is typically purified by [[distillation]] from [[sulfuric acid|H<sub>2</sub>SO<sub>4</sub>]]. In contrast, [[Cp*|C<sub>5</sub>(CH<sub>3</sub>)<sub>5</sub>H]] requires a strong [[Base (chemistry)|base]] such as [[butyllithium]] for deprotonation, as is typical for a hydrocarbon.<ref>R. D. Chambers, A. J. Roche, J. F.S. Vaughan "Direct syntheses of Pentakis(trifluoromethyl)cyclopentadienide Salts and Related Systems" Canadian Journal of Chemistry volume 74, pages 1925-1929 (1996).</ref> This compound is prepared in a multistep, one-pot reaction of [[potassium fluoride]] (KF) with 1,1,2,3,4,4-hexachlorobutadiene. |
|||
===Hexafluoroacetone and its imine=== |
|||
The molecule [[hexafluoroacetone]] ((CF<sub>3</sub>)<sub>2</sub>CO), the fluoro-analogue of [[acetone]], has a boiling point of −27 °C compared to +55 °C for acetone itself. This difference illustrates one of the remarkable effects of replacing C-H bonds with C-F bonds. Normally, the replacement of H atoms with heavier halogens results in elevated boiling points due to increased [[London dispersion force]]s between molecules. Further demonstrating the remarkable effects of fluorination, (CF<sub>3</sub>)<sub>2</sub>CO forms a stable, distillable hydrate,<ref>{{OrgSynth | author = Van Der Puy, M. ; Anello, L. G. | title = Hexafluoroacetone | collvol = 7 | collvolpages = 251 | prep = cv7p0251}}</ref> (CF<sub>3</sub>)<sub>2</sub>C(OH)<sub>2</sub>. [[Ketone]]s rarely form stable hydrates. Continuing this trend, (CF<sub>3</sub>)<sub>2</sub>CO adds [[ammonia]] to give (CF<sub>3</sub>)<sub>2</sub>C(OH)(NH<sub>2</sub>) which can be dehydrated with POCl<sub>3</sub> to give (CF<sub>3</sub>)<sub>2</sub>CNH.<ref>{{OrgSynth | author = Middleton, W. J.; Carlson, H. D. | title = Hexafluoroacetoneimine | collvol = 6 | collvolpages = 664 | prep = cv6p0664}}</ref> Compounds of the type R<sub>2</sub>C=NH are otherwise quite rare. |
|||
===Aliphatic vs. Aromatic Organofluorines=== |
|||
Aliphatic organofluorines tend to segregate from aliphatic hydrocarbons while aromatic organofluorines tend to mix with aromatic hydrocarbons. Aliphatic systems self-segregate due to hydrocarbons experiencing greater intermolecular attractive forces over fluorocarbon-based molecular surfaces.<ref name=Lemal/> This behavior is evidenced by the following crystal structures.<!-- illustrated here --><ref>J. Lapasset, J. Moret, M. Melas, A. Collet, M. Viguier, H. Blancou, ''Z. Kristallogr.'' '''1996''', ''211'', 945. [[Cambridge Structural Database|CSD]] entry TULQOG.</ref><ref>C.E. Smith, P.S. Smith, R.Ll. Thomas, E.G. Robins, J.C. Collings, Chaoyang Dai, A.J. Scott, S. Borwick, A.S. Batsanov, S.W. Watt, S.J. Clark, C. Viney, J.A.K. Howard, W. Clegg, T.B. Marder, ''J. Mater. Chem.'' '''2004''', ''14'', 413. CSD entry ASIJIV.</ref> |
|||
[[Image:Aliphatic Fluorocarbon.jpg|left|thumb|325px|Aliphatic Fluorocarbon-Hydrocarbon Packing (Fluorine atoms are green)]] |
|||
[[Image:Aromatic Fluorocarbon.jpg|thumb|Aromatic Fluorocarbon-Hydrocarbon Packing (Fluorine atoms are green)]] |
|||
<br clear="all" /> |
|||
==Methods for preparation of organofluorines== |
|||
Since organofluorines very rarely occur naturally, they must be synthesized. Some methods include: |
|||
*Direct fluorination of hydrocarbons with F<sub>2</sub>, often highly diluted with N<sub>2</sub>. |
|||
:R<sub>3</sub>CH + F<sub>2</sub> → R<sub>3</sub>CF + HF |
|||
:Such reactions are important in the preparation but require care because hydrocarbons can uncontrollably "burn" in F<sub>2</sub>, analogous to the [[combustion]] of hydrocarbon in O<sub>2</sub>. For example, butane burns in an atmosphere of fluorine. |
|||
:C<sub>4</sub>H<sub>9</sub> + 12.5 F<sub>2</sub> → 4 CF<sub>4</sub> + 9 HF |
|||
*[[Metathesis]] reactions employing [[alkali metal]] fluorides <ref>See: [http://www.chempensoftware.com/reactions/RXN202.htm Gryszkiewicz-Trochimowski and McCombie method]</ref>. |
|||
:R<sub>3</sub>CCl + MF → R<sub>3</sub>CF + MCl (M = Na, K, Cs) |
|||
*Metathesis with [[antimony trifluoride]], sometimes with [[antimony pentachloride]] as catalyst – the [[Swarts reaction]] |
|||
*From preformed fluorinated reagents. Many fluorinated building blocks are available: CF<sub>3</sub>X (X = Br, I), C<sub>6</sub>F<sub>5</sub>Br, and C<sub>3</sub>F<sub>7</sub>I. These species form [[Grignard reagents]] that then can be treated with a variety of [[electrophile]]s.<ref>{{OrgSynth | author = Crombie, A.; Kim, S.-Y.; Hadida, S; Curran, and D. P. | title = Synthesis of Tris(2-Perfluorohexylethyl)tin Hydride: A Highly Fluorinated Tin Hydride with Advantageous Features of Easy Purification | collvol = 10 | collvolpages = 712 | year = 2004 | prep = v79p0001}}</ref> |
|||
*Decomposition of aryldiazonium tetrafluoroborates in the [[Sandmeyer reaction]]<ref>{{OrgSynth | author = Flood, D. T. | title = Fluorobenzene | collvol = 2 | collvolpages = 295 | prep = cv2p0295}}</ref> or [[Schiemann reaction]]: |
|||
:ArN<sub>2</sub>BF<sub>4</sub> → ArF + N<sub>2</sub> + BF<sub>3</sub> |
|||
* [[Nucleophilic displacement]] of [[hydroxyl]] and [[carbonyl]] groups by so-called '''deoxofluorination agents'''. One method of fluoride for oxide exchange in carbonyl compounds is with [[sulfur tetrafluoride]]: |
|||
:RCO<sub>2</sub>H + [[Sulfur tetrafluoride|SF<sub>4</sub>]] → RCF<sub>3</sub> + [[Sulfur dioxide|SO<sub>2</sub>]] + HF |
|||
:Alternately, organic reagents such as [[diethylaminosulfur trifluoride]] (DAST, NEt<sub>2</sub>SF<sub>3</sub>) and bis(2-methoxyethyl)aminosulfur trifluoride (deoxo-fluor) are easier to handle and more selective:<ref>''Bis(2-methoxyethyl)aminosulfur trifluoride: a new broad-spectrum deoxofluorinating agent with enhanced thermal stability'' Gauri S. Lal, Guido P. Pez, Reno J. Pesaresi and Frank M. Prozonic [[Chem. Commun.]], '''1999''', 215 - 216, {{DOI|10.1039/a808517j}}</ref> |
|||
:[[Image:Deoxo-Fluor application.png|400px|bis(2-methoxyethyl)aminosulfur trifluoride reaction]] |
|||
* Electrophilic fluorination reagents also exist, for example [[F-TEDA-BF4|F-TEDA-BF<sub>4</sub>]]. |
|||
==See also== |
==See also== |
Revision as of 21:15, 13 September 2010
Fluorocarbons, sometimes referred to as perfluorocarbons, are organofluorine compounds that contain only carbon and fluorine bonded together in strong carbon–fluorine bonds. Fluoroalkanes that contain only single bonds are more chemically and thermally stable than alkanes. However, fluorocarbons with double bonds (fluoroalkenes) and especially triple bonds (fluoroalkynes) are more reactive than their corresponding hydrocarbons. Fluoroalkanes can serve as oil-repellant/water-repellant fluoropolymers, solvents, liquid breathing research agents, and powerful greenhouse gases. Unsaturated fluorocarbons tend to be used as reactants.
Many chemical compounds are labeled as fluorocarbons, perfluorinated, or with the prefix perfluoro- despite containing atoms other than carbon or fluorine, such as chlorofluorocarbons and perfluorinated compounds; however, these molecules are fluorocarbon derivatives, and not true fluorocarbons. Fluorocarbon derivatives share many of the properties of fluorocarbons, while also possessing new properties due to the inclusion of new atoms. For example, fluorocarbon derivatives can function as fluoropolymers, refrigerants, solvents, anesthetics, fluorosurfactants, and ozone depletors.
Usage of term
The formal IUPAC definition of a fluorocarbon is a molecule consisting wholly of fluorine and carbon.[1] However, other fluorocarbon based molecules that are not technically fluorocarbons are commonly referred to as fluorocarbons,[2] because of similar structures and identical properties. Compounds with atoms other than carbon and fluorine are not true fluorocarbons and they are considered as fluorocarbon derivatives in a separate section below.
Properties
Physical properties
Fluorocarbon liquids are colorless. They have high density, up to over twice that of water, due to their high molecular weight. Low intermolecular forces give the liquids low viscosities when compared to liquids of similar boiling points. Also, low surface tension, heats of vaporization, and refractive indices are notable. They are not miscible with most organic solvents (e.g., ethanol, acetone, ethyl acetate and chloroform), but are miscible with some hydrocarbons (e.g., hexane in some cases). They have very low solubility in water, and water has a very low solubility in them (on the order of 10 ppm). The number of carbon atoms in a fluorocarbon molecule largely determines most physical properties. The greater the number of carbon atoms, the higher the boiling point, density, viscosity, surface tension, critical properties, vapor pressure and refractive index. Gas solubility decreases as carbon atoms increase, while melting point is determined by other factors as well, so is not readily predicted.
London dispersion force reduction
As the high electronegativity of fluorine reduces the polarizability of the atom,[2] fluorocarbons are only weakly susceptible to the fleeting dipoles that form the basis of the London dispersion force. As a result, fluorocarbons have low intramolecular attractive forces and are lipophobic in addition to being hydrophobic/non-polar. Thus fluorocarbons find applications as oil-, water-, and stain-repellants in products such as Gore-Tex and fluoropolymer carpet coatings. The reduced participation in the London dispersion force makes the solid polytetrafluoroethylene (PTFE) slippery as it has a very low coefficient of friction. Also, the low attractive forces in fluorocarbon liquids make them compressible and gas soluble while smaller fluorocarbons are extremely volatile.[2] There are five fluoroalkane gases; tetrafluoromethane (bp −128 °C), hexafluoroethane (bp −78.2 °C), octafluoropropane (bp −36.5 °C), perfluoro-n-butane (bp −2.2 °C) and perfluoro-iso-butane (bp −1 °C). Nearly all other fluoroalkanes are liquids with the exception of perfluorocyclohexane, which sublimes at 51 °C.[3] As a result of the high gas solubility of fluorocarbon liquids, they have been the subject of medical research as blood carriers because of their oxygen solubility.[4] Fluorocarbons also have low surface energies and high dielectric strengths.[2]
Fluoroalkane stability
Fluorocarbons with only single bonds are very stable because of the strength and nature of the carbon–fluorine bond. It is called the strongest bond in organic chemistry.[5] Its strength is a result of the electronegativity of fluorine imparting partial ionic character through partial charges on the carbon and fluorine atoms.[5] The partial charges shorten and strengthen the bond through favorable coulombic interactions. Additionally, multiple carbon–fluorine bonds increase the strength and stability of other nearby carbon–fluorine bonds on the same geminal carbon, as the carbon has a higher positive partial charge.[2] Furthermore, multiple carbon–fluorine bonds also strengthen the "skeletal" carbon–carbon bonds from the inductive effect.[2] Therefore, saturated fluorocarbons are more chemically and thermally stable than their corresponding hydrocarbon counterparts. However, fluoroalkanes are not inert. They are susceptible to reduction through the Birch reduction.
Fluoroalkene and fluoroalkyne reactivity
When fluorocarbons are unsaturated, they are less stable and more reactive than fluoroalkanes, or comparable hydrocarbons, due to the electronegativity of fluorine. The reactivity of the simplest fluoroalkyne, difluoroacetylene, is an example of this instability; difluoroacetylene easily polymerizes.[2] Another example is fluorofullerene, which has weaker and longer carbon–fluorine bonds than saturated fluorocarbons.[6] It is reactive towards nucleophiles and hydrolyzes in solution.[6] Additionally, the polymerization of the fluoroalkene tetrafluoroethylene (which results in PTFE) is more energetically favorable than that of ethylene.[2] Unsaturated fluorocarbons have a driving force towards sp3 hybridization due to the electronegative fluorine atoms seeking a greater share of bonding electrons with reduced s character in orbitals.[2]
Manufacture
Prior to World War II, the only known route to fluorocarbons was by direct reaction of fluorine with the hydrocarbon. This highly exothermic process was capable only of synthesising tetrafluoromethane, hexafluoroethane and octafluoropropane; larger hydrocarbons decomposed in the extreme conditions. The Manhattan project saw the need for some very robust chemicals, including a wider range of fluorocarbons, requiring new manufacturing methods. The so-called "catalytic" method involved reacting fluorine and hydrocarbon on a bed of gold-plated copper turnings, the metal removing the heat of the reaction (so not really acting as a catalyst at all), allowing larger hydrocarbons to survive the process. However, it was the Fowler process that allowed the large scale manufacture of fluorocarbons required for the Manhattan project.
The Fowler Process
The Fowler process uses cobalt fluoride to moderate the reaction. In the laboratory, this is typically done in two stages, the first stage being fluorination of cobalt difluoride to cobalt trifluoride.
- 2 CoF2 + F2 → 2 CoF3
During the second stage, in this instance to make perfluorohexane, the hydrocarbon feed is introduced and is fluorinated by the cobalt trifluoride, which is converted back to cobalt difluoride. Both stages are performed at high temperature.
- C6H14 + 28 CoF3 → C6F14 + 14 HF + 28 CoF2
Industrially, both steps are combined, for example in the manufacture of the Flutec range of fluorocarbons, using a vertical stirred bed reactor, with hydrocarbon introduced at the bottom, and fluorine introduced half way up the reactor. The fluorocarbon vapor is recovered from the top.
Electrochemical Fluorination
An alternative technique, electrochemical fluorination (ECF) (also known as the Simons' process) involves electrolysis of a substrate dissolved in hydrogen fluoride. As fluorine is itself manufactured by the electrolysis of hydrogen fluoride, this is a rather more direct route to fluorocarbons. The process is run at low voltage (5 - 6 V) so that free fluorine is not liberated. The choice of substrate is restricted as ideally it should be soluble in hydrogen fluoride. Ethers and tertiary amines are typically employed. To make perfluorohexane, trihexylamine is used, for example:
- 2 N(C6H13)3 + 90 HF → 6 C6F14 + 2 NF3 + 45 H2
The perfluorinated amine will also be produced:
- N(C6H13)3 + 42 HF → 2 N(C6F13)3 + 21H2
Both of these products, and others, are manufactured by 3M as part of the Fluorinert range.
Derivatives
Fluorocarbon derivatives are highly fluorinated molecules that are commonly referred to as fluorocarbons. They are economically useful because they share part or nearly all of the properties of fluorocarbons. Some fluorocarbon derivatives have markedly different properties than fluorocarbons. For example, fluorosurfactants powerfully reduce surface tension by concentrating at the liquid-air interface due to the lipophobicity of fluorocarbons,[7] due to the polar functional group added to the fluorocarbon chain. Other groups or atoms for fluorocarbon based compounds the oxygen atom incorporated into an ether group for anesthetics, and the chlorine atom for chlorofluorocarbons (CFCs). In a sharp contrast to true fluorocarbons, the chlorine atom produces a chlorine radical which degrades ozone.
Fluorosurfactants
Anesthetics
- Methoxyflurane (contains chlorine)
- Enflurane (contains chlorine)
- Isoflurane (contains chlorine)
- Sevoflurane
- Desflurane
Halogenated derivatives
- Polychlorotrifluoroethylene ([CFClCF2]n)
- Perfluorooctyl bromide (Perflubron)
- Dichlorodifluoromethane
- Chlorodifluoromethane
Hydrofluorocarbons
- Polyvinylidene fluoride ([CH2CF2]n)
- Tetrafluoroethane
Environmental and Health Concerns
Despite the presence of some natural fluorocarbons and fluorocarbon-derivatives, such as tetrafluoromethane and CFCs, which have been reported in igneous and metamorphic rock,[8] man-made fluorocarbon based compounds are implicated in a variety of environmental and health related issues. For example, CFCs deplete the ozone layer while fluoroalkanes, commonly referred to as perfluorocarbons, are potent greenhouse gases. Also, the fluorosurfactants PFOS and PFOA, and other related chemicals, are persistent global contaminants. PFOS is a proposed persistent organic pollutant and may be currently harming the health of wildlife.
See also
External links
- Fluorocarbons and Sulphur Hexafluoride, proposed by the European Fluorocarbons Technical Committee
- CFCs and Ozone Depletion Freeview video provided by the Vega Science Trust.
- Introduction to fluoropolymers
- Organofluorine chemistry by Graham Sandford
References
- ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "fluorocarbons". doi:10.1351/goldbook.F02459
- ^ a b c d e f g h i Lemal DM (2004). "Perspective on fluorocarbon chemistry". J. Org. Chem. 69 (1): 1–11. doi:10.1021/jo0302556. PMID 14703372.
{{cite journal}}
: Unknown parameter|month=
ignored (help) - ^ http://www.ornl.gov/~webworks/cpr/v823/rpt/108771.pdf
- ^ Lewandowski G, Meissner E, Milchert E (2006). "Special applications of fluorinated organic compounds". J. Hazard. Mater. 136 (3): 385–91. doi:10.1016/j.jhazmat.2006.04.017. PMID 16759798.
{{cite journal}}
: Unknown parameter|month=
ignored (help)CS1 maint: multiple names: authors list (link) - ^ a b O'Hagan D (2008). "Understanding organofluorine chemistry. An introduction to the C–F bond". Chem. Soc. Rev. 37 (2): 308–19. doi:10.1039/b711844a. PMID 18197347.
{{cite journal}}
: Unknown parameter|month=
ignored (help) - ^ a b Kiplinger JL, Richmond TG, Osterberg CE (1994). "Activation of Carbon-Fluorine Bonds by Metal Complexes". Chem. Rev. 94 (2): 373–431. doi:10.1021/cr00026a005.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ Mason Chemical Company: "Fluorosurfactant - Structure / Function" Accessed November 1, 2008.
- ^ Murphy CD, Schaffrath C, O'Hagan D.: "Fluorinated natural products: the biosynthesis of fluoroacetate and 4-fluorothreonine in Streptomyces cattleya" Chemosphere. 2003 Jul;52(2):455-61.