212.146.47.250 (talk) No edit summary |
m units &/or links |
||
Line 3: | Line 3: | ||
It is also the name of the international [[non-profit]] [[consortium]] designing and implementing the platform. |
It is also the name of the international [[non-profit]] [[consortium]] designing and implementing the platform. |
||
DRM is being seriously considered by [[Ofcom]] for introduction in [[Britain]] in |
DRM is being seriously considered by [[Ofcom]] for introduction in [[Britain]] in 2012 on the present AM medium wave band. |
||
==Features== |
==Features== |
Revision as of 12:17, 30 September 2006
Digital Radio Mondiale (DRM) is a set of digital audio broadcasting technologies designed to work over the bands currently used for AM broadcast, particularly shortwave. DRM can fit more channels than AM, at higher quality, into a given amount of bandwidth, using various MPEG-4 codecs.
It is also the name of the international non-profit consortium designing and implementing the platform.
DRM is being seriously considered by Ofcom for introduction in Britain in 2012 on the present AM medium wave band.
Features
DRM can deliver FM-comparable sound quality, but over the old AM bands (long wave, medium wave and short wave) and distances. VHF is also under consideration. DRM has been designed especially to use older AM transmitters, avoiding major new investments. DRM is robust against fading and interference.
The encoding and decoding can be performed with digital signal processing, so that a cheap embedded computer with a conventional transmitter and receiver can perform the rather complex encoding and decoding.
As a digital medium, DRM can transmit other digital data as well as the music, including text, pictures, and computer programs (datacasting) — as well as RDS-type metadata or program-associated data like DAB does. Unlike most other DAB systems, DRM uses in-band on-channel (IBOC) technology and can operate in a hybrid mode called Single Channel Simulcast, simulcasting both analog signal and digital signal.
Status
The LW/MW/SW standard has been approved by the IEC, and the ITU has approved its use in most of the world. Approval for ITU region 2 (North and South America and the Pacific) is pending amendments to existing international agreements. The inaugural broadcast took place on June 16, 2003, in Geneva, Switzerland, at the ITU's annual World Radio Conference.
Current broadcasters include Radio Luxembourg, biteXpress, Passion Radio and Deutsche Welle.
No manufacturer is presently producing DRM receivers. Present receivers typically use a personal computer, and Kenwood and Fraunhofer produced a prototype standalone receiver in September 2006 [1].
International regulation
On 28 September 2006, the Australian spectrum regulator, the Australian Communications and Media Authority, announced that it had "placed an embargo on frequency bands potentially suitable for use by broadcasting services using Digital Radio Mondiale..." being "5950–6200, 7100–7300, 9500–9900, 11650–12050, 13600–13800, 15100–15600, 17550–17900, 21450–21850 and 25670–26100 kHz."[1]
Technique
Source coding
Useful bitrates with DRM range from 8 kbit/s to 20 kbit/s for a standard broadcast channel (10 kHz bandwidth). It is possible to achieve bitrates up to 72 kbit/s by using more bandwidth than 10 kHz. Useful bitrate depends also on other parameters like wanted robustness to errors (error coding), power needed (modulation scheme), robustness in regard to propagation conditions (multipath, doppler). So DRM offers the possibility to use different audio coding system (source coding) depending on the bitrate:
- MPEG-4 HE-AAC (High Efficiency - Advanced Audio Coding). AAC is a perceptual coder suited for voice and music and the High Efficiency is an optional extension for reconstruction of high frequencies (SBR: spectral bandwidth replication) and stereo image (PS: Parametric Stereo).
- MPEG-4 CELP which is a parametric coder suited for voice only (vocoder) but that is robust to errors and needs a small bitrate.
- MPEG-4 HVXC which is also a parametric coder for speech programs that use an even smaller bitrate than CELP.
All codecs can optionally be combined with Spectral Band Replication.
Broadcasters have some freedom of choice depending on the material they send. The most commonly used mode is HE-AAC (also called AAC+) that offers an acceptable audio quality somewhat comparable to FM broadcast.
Bandwidth
DRM broadcasting can be done on different bandwidth:
- 9 kHz or 10 kHz which are the standard bandwidth of an AM broadcasting channel so existing frequency plan can be reused.
- 4.5 kHz or 5 kHz which are half channels. The idea is to offer a possibility for the broadcaster to do simulcast and use half a channel for AM and the other half for DRM. However the resulting bitrate and audio quality is less.
- 18 kHz or 20 kHz which correspond to a coupling of two adjacent channels. It offers the possibility to offer a better audio quality or to multiplex audio channels in the same transmitter.
Modulation
The modulation used for DRM is COFDM (Coded Orthogonal Frequency Division Multiplexing), where every carrier is modulated with QAM (Quadrature Amplitude Modulation) with a choosable error coding.
The choice of transmission parameters depends on signal robustness wanted, propagation conditions. Transmission signal is affected by noise, interference, multipath wave propagation and Doppler effect.
It is possible to choose among several error coding schemes and several modulation patterns: 64-QAM, 16-QAM and 4-QAM. OFDM modulation has some parameters that must be adjusted depending on propagation conditions. This is the carrier spacing which will determine the robustness against Doppler effect (which cause frequencies offsets, spread: Doppler spread) and OFDM guard interval which determine robustness against multipath propagation (which cause delay offsets, spread: delay spread). The DRM consortium has determined 4 different profiles corresponding to typical propagation conditions:
- A: Gaussian channel with very little multipath propagation and Doppler effect. This profile is suited for local or regional broadcasting.
- B: multipath propagation channel. This mode is suited for medium range transmission. It is nowadays frequently used.
- C: similar to mode B, but with better robustness to Doppler (more carrier spacing). This mode is suited for long distance transmission.
- D: similar to mode B, but with a resistance to large delay spread and Doppler spread. This case exists with adverse propagation conditions on very long distance transmissions. The useful bitrate for this profile is decreased.
The tradeoff between these profiles stands between robustness, resistance in regards to propagation conditions and useful bitrates for the service. This table presents some values depending on these profiles. The more the carrier spacing is the more the system is resistant to Doppler effect (Doppler spread). The more the guard interval is the more the system is resistant to long multipath propagation (delay spread).
The resulting low-bitrate digital information is modulated using COFDM. It can run in simulcast mode by switching between DRM and AM, and it is also prepared for linking to other alternatives (e.g. DAB or FM services).
DRM has been tested successfully on shortwave, mediumwave (with 9 as well as 10 kHz channel spacing) and longwave.
Mode | OFDM Carrier spacing (Hz) | Number of carriers | Symbol length (ms) | Guard interval length (ms) | Nb symbols per frame | |||
---|---|---|---|---|---|---|---|---|
9 kHz | 10 kHz | 18 kHz | 20 kHz | |||||
A | 41,66 | 204 | 228 | 412 | 460 | 26,66 | 2,66 | 15 |
B | 46,88 | 182 | 206 | 366 | 410 | 26,66 | 5,33 | 15 |
C | 68,18 | * | 138 | * | 280 | 20,00 | 5,33 | 20 |
D | 107,14 | * | 88 | * | 178 | 16,66 | 7,33 | 24 |
There is also a lower bandwidth two-way communication version of DRM as a replacement for SSB communications on HF [2]- note that it is NOT compatible with the official DRM specification.
The Dream software ( http://drm.sourceforge.net/ ) will receive the commercial versions and also limited transmission mode using the FAAC AAC encoder.
Error coding
Error coding can be chosen to be more or less robust.
This table show an example of useful bitrates depending on protection classes, OFDM propagation profiles (A or B), carrier modulation (16QAM or 64QAM) and channel bandwidth (9 or 10 kHz):
Protection class | A (9 kHz) | B (9 kHz) | B (10 kHz) | C (10 kHz) | D (10 kHz) | |||
---|---|---|---|---|---|---|---|---|
64-QAM | 16-QAM | 16-QAM | 64-QAM | 16-QAM | 64-QAM | 16-QAM | 64-QAM | |
0 | 19,6 kbit/s | 7,6 | 8,7 | 17,4 | 6,8 | 13,7 | 4,5 | 9,1 |
1 | 23,5 | 10,2 | 11,6 | 20,9 | 9,1 | 16,4 | 6,0 | 10,9 |
2 | 27,8 | - | - | 24,7 | - | 19,4 | - | 12,9 |
3 | 30,8 | - | - | 27,4 | - | 21,5 | - | 14,3 |
DRM Plus
While DRM currently covers the broadcasting bands below 30 MHz, the DRM consortium voted in March 2005 to begin the process of extending the system to the VHF bands up to 120 MHz. DRM Plus (DRM+) will be the name of this technology. Design, development and testing are expected to be completed by 2007-2009.
Wider bandwidth channels will be used, which will allow radio stations to use higher bit rates, thus providing higher audio quality. One likely channel bandwidth is 50 kHz, which will allow DRM Plus to carry radio stations at near CD-quality. A 100 kHz DRM+ channel has sufficient capacity to carry one mobile TV channel: it would be feasible to distribute mobile TV over DRM+ rather than DMB or DVB-H.
References
- Digital Radio Mondiale - Consortium Agreement
- ETSI Standard: Digital Radio Mondiale (DRM); System Specification, ETSI ES 201 980 V2.1.1 (2005-10)
- ETSI Standard: Digital Radio Mondiale (DRM); Multiplex Distribution Interface (MDI), ETSI TS 102 820 V1.2.1 (2005-10)
- ETSI Standard: Digital Radio Mondiale (DRM); AM Signalling System (AMSS), ETSI TS 102 386 V1.2.1 (2006-03)
- ETSI Standard: Digital Radio Mondiale (DRM); Receiver Status and Control Interface (RSCI), ETSI TS 102 349 V1.2.1 (2005-11)
- ETSI Standard: Digital Radio Mondiale (DRM); Data Applications Directory, ETSI TS 101 968 V1.2.1 (2004-02)
- ETSI Standard: Digital Radio Mondiale (DRM); Transportation and Binary Encoding Specification for Electronic Programme Guide (EPG), ETSI TS 102 371 V1.2.1 (2006-02)
- ETSI Standard: Digital Radio Mondiale (DRM); XML Specification for DAB Electronic Programme Guide (EPG), ETSI TS 102 818 V1.3.1 (2006-02)
- "Planning parameters" for digital sound broadcasting at frequencies below 30 MHz, ITU-R Recommendation BS.1615, (Question ITU-R 223/10) (payment required)
- DRM consortium website
- J.Stott: DRM — key technical features, article in the EBU technical review
See also
- AMSS AM signalling system
- DVB-H (Digital Video Broadcasting - Handhelds)
- DVB-T (Digital Video Broadcasting - Terrestrial)
- DMB (Digital Multimedia Broadcasting)
- DAB (Digital Audio Broadcasting)
- HD Radio, American system for digital radio in FM-band
- ISDB-T, Japanese system for digital radio and television
- Software licensing
External links
DRM hardware
- [3] Digital Radio Mondiale on a single chip.
DRM in general
- Digital Radio Mondiale (DRM) - official homepage
- hard-core-dx: Latest news on DRM
- (pdf) DRM - progress on the receiver front
- A Listeners' Guide to Digital AM (DRM)
- DRM Patent Licensing
- DRM - Digital Radio Mondiale - Digital AM radio below 30 MHz
- UK Digital Radio News
- Kortbølge stationsdatabase kan downloades efter registrering (tager nogle dage): The World Top Shortwave Broadcasting Database: "This ILGRadio Database is now in use by more than 23 000 listeners, living in 139 countries all over the world!"
- DRM Digital Radio - A broadcasters view of the future
DRM software
- DRM Software Radio developed by the Fraunhofer IIS
- Dream DRM receiver. An open source software radio published by the University Darmstadt (Germany)
- HamDream A modificated DREAM receiver supporting 2.5 kHz bandwidth.
- Diorama DRM receiver. An open source DRM receiver written in MATLAB by the Institute of Telecommunications of the University Kaiserslautern (Germany))
- Spark A DRM software transmitter developed by the University of Applied Sciences Kaiserslautern (Germany)
DRM radio techniques
- Welcome to the DRM Software Radio website
- DRM Receiver Modifications
- "bird-nest" DRM receiver
- Dream - an open-source software DRM Receiver
- Spark, a DRM signal generator (transmitter) software, University of Applied Sciences-Kaiserslautern Germany
DRM's COFDM
- "The how and why of COFDM" Jonathan Stott. EBU: EBU Technical Review 278 (winter 1998).
- Explaining some of the magic of COFDM, J H Stott (BBC): "COFDM is particularly well matched to these applications, since it is very tolerant of the effects of multipath."
- Coded Orthogonal Frequency Division Multiplexing (COFDM)
- All About OFDM from SSS Online and Pegasus Technologies
- OFDM, VOFDM, COFDM, Orthogonal Frequency Division Multiplexing: tutorials
- OFDM, VOFDM, COFDM, Orthogonal Frequency Division Multiplexing: resources
- COFDM/8-VSB Controversy Archive & Links
Index
- dmoz: Digital Broadcasting
- ^ "ACMA embargoes spectrum to plan for Digital Radio Mondiale". Australian Communication and Media Authority. 28 September 2006.